1. Getting Started
Please note that the Spring Bar Tool pictured is different to the one offered with every first purchase
2. Removing the Strap from the Case
With the forked end of your Spring Bar tool, locate the Spring Bar. Compress it inwards and you will be able to remove the Strap from the casing.
3. Reusing your Pin
After having removed the pin from your old Strap, insert it into your new one.
4.Fix new Strap on the Case
With the forked end of your Spring Bar tool, compress the Spring inwards and you will be able to attach the spring to the casing.
5. Reusing your Buckle
Using the pin like end of the Spring Bar Tool to compress the spring bar will release it from the buckle.
6. Putting the Hinge into Place
Take-out the pin from your old Strap and place into your new one, make sure the hinge pin is properly caught.
7. Fixing the Buckle
Use the forked side of the Spring Bar Tool to fix the Buckle. Make sure the hinge pin sits above the Buckle.
8. Well Done, Enjoy your new Watch Strap
Warning; once done, you need to check that all elements are nicely in place; Pulling / Twisting the Straps and the Buckle a few times is the way to do so.